The A+T DLA1 loadcell amplifier converts standard load cells or load pins into RS232, NMEA0183, NMEA 2000 ready CANbus or 0-5 V analogue data, with Bluetooth as an option. A trip relay can be used as an alarm output or limit switch. The unit has two RS232/NMEA inputs that can be multiplexed with the measured load before being retransmitted, and the output can be logged on a PC running Expedition.
Calibration can be done from a connected display, from a PC over RS232 or with a push button and adjustment inside the cover. The DLA1 can drive an A+T MINI display directly, and runs on 9-32 V DC. A+T Instruments is not affiliated with B&G or Navico; B&G product names are used for compatibility reference only.
Specifications
- Type: loadcell/loadpin amplifier
- Power: 9-32 V DC
- Outputs: RS232, NMEA0183, CANbus (NMEA 2000 ready), 0-5 V analogue, Bluetooth optional
- Trip relay: alarm output or limit switch
- Inputs: loadcell or loadpin, 2 x RS232/NMEA serial inputs (can be multiplexed with load data)
- Calibration: from display, PC via RS232, or internal push button
- Drives: A+T MINI display
Downloads: AT-Loadcell-Module-DLA1-V3.1-1.pdf