Shop Applications News About Contact Book a meeting Connectivity guide Search GMTS CONNECT ↗ VesselNow ↗ GMount Network Status Login

← Back to news

SpeedFusion Boost: Starlink handovers stop dragging the bond

Share LinkedIn

Headline feature of Peplink 8.6 for us: SpeedFusion Boost. When Starlink hands over, weather degrades or a congested 5G cell flaps, the bond used to stutter as if every WAN died together. Boost isolates the bad leg so voice, CCTV and ops VLANs keep flowing on the links that are still up.

A delivery-day picture

Starlink on the arch, One NZ on the Peplink, crew on a Teams call. The dish swaps satellites. Boost is the difference between a two-second glitch and a minute of “you froze”. We are not publishing throughput numbers we have not measured on a GMTS install; we are saying what we watch on InControl when Boost is enabled.

What we still configure by hand

  • Which WAN is primary for which traffic.
  • Hot Failover so sessions move cleanly when a link really dies.
  • Alerts so someone hears about a week of flapping cellular, not just a red icon.

Supported models are listed on Peplink’s 8.6 page — B One, Balance, BR, Dome, Transit, Orbit, X series, FusionHub. Match the list before you promise Boost on a quote. Production fleets stay on GA firmware (8.6.1 as of our November 2026 notes); see our firmware update guide.

Boost is not magic
If you only have one WAN, Boost cannot invent a second path. Cellular or a second modem still matters for boats and rural sites.

Talk to the team

Want Boost checked on your fleet? Get in touch or book a time. See Peplink SD-WAN and Starlink for boats.

← Back to news

Talk to GMTS ← Back to news