The Antenna MAX is Peplink’s roof-mounted all-in-one antenna enclosure that maximizes signal strength and durability while significantly reducing the loss seen in traditional antenna cabling setups.
Maximum Gain & Minimal Cable Loss
By housing the Peplink router directly inside the antenna enclosure, the Antenna MAX nearly eliminates the signal degradation typical of long RF cables. Instead, it relies on a simple Ethernet cable for power and connectivity, helping you retain up to 6.6 dBi of cellular gain.
Built for Harsh Environments
Its weatherproof, UV-resistant plastic housing is built to endure moisture, salt spray, and corrosion—earning an IP67 rating—and is designed for outdoor installation on surfaces like vehicles or rooftops.
Broad Compatibility & Flexible Mounting
Compatible with a range of Peplink routers—including the BR1 Mini series, Transit Duo Pro, BR1 Pro 5G, and POTS Adapter—the Antenna MAX supports various mounting options (surface, wall, pole, deck), making it versatile for both fixed and mobile applications.
All-in-One Antenna System
The enclosure integrates:
- 4×4 MIMO for cellular (LTE/5G)
- 2×2 MIMO Wi-Fi
- GPS antenna
Covering frequencies from 600–6000 MHz (cellular), 2.4–2.5 GHz & 5.0–6.0 GHz (Wi-Fi), and GPS at 1575–1602 MHz with respective gains up to 6.6 dBi (cellular) and 7.4 dBi (Wi-Fi).
In summary, the Antenna MAX takes Peplink’s antenna design to the next level by integrating your router right into the antenna enclosure:
- Superior signal retention by eliminating long RF cables
- Rugged outdoor housing built for harsh conditions
- Wide compatibility with different routers and mounts
- Comprehensive antenna array for cellular, Wi-Fi, and GPS